★Equipment function

   Tilting machine is used for turning over  pallet with PC components in production line. After the mould removal is completed, the tilting table turns the pallet and PC components to nearly 90° to ensure that the PC components are not damaged during the lifting process.

★Equipment feature

    The component supporting beam can prevent the component from falling off when turned over, and the top supporting device can realizethe component supporting at any position within 400mm of the edge of the pallet.

    1.The two turning arms realize the synchronous turning of the two turning arms through a high-precision hydraulic system.

    2.The turning moment of the turning machine is large, which ensures that the beam can rotate smoothly in the predetermined direction when the pallet and the PC component are turned.

    3.The hydraulic system guarantees the stability of hydraulic reversal and the start and stop at any position within the working range.

    4.The turning and jacking of the tilting table adopts hydraulic locking device, and the turning and jacking action is safe and reliable.

    5.The control uses related buttons on the control panel, which is simple and convenient.

★Equipment composition

• Tilting support
• Tilting arm
• Jacking device
• Component bearing beam
• Locking device
• Small support
• Hydraulic system
• Electrical system
• Bearing beam support

★The main parameters

Tilting load   ≤25t

Tilting angle： 0°～85°

Tilting time：up  90s     down  60s

Tilting synchronization：  ≤3%

Hydraulic system pressure：16MPa

Fuel tank capacity：270L

Motor power：11KW

Total weight： 5.0t

Power：380V±20%     

★Standard accessories and optional accessories (bearing beam support)

Optional item：Inner wall pannel and outside wall pannel process

Distance between large beam and pallet 34mm-114mm.